XTOOL D1 5W

The best scaled-down high power industrial laser engraver and cutter for beginners, hobbyists, designers, artists, homeowners and professionals.

Improved technologies (industrial grade steel wheel and shaft/tension wheel/synchronous belt/compressed light spot, etc.) make the carving more precise and the carved works perfect. With more humanized designs, you can always focus on your creation.

High precision DIY laser engraving and cutting machine

The best scaled-down high power industrial laser engraver and cutter for beginners, hobbyists, designers, artists, homeowners and professionals.

Improved technologies (industrial grade steel wheel and shaft/tension wheel/synchronous belt/compressed light spot, etc.) make the carving more precise and the carved works perfect. With more humanized designs, you can always focus on your creation.

High precision cutting and engraving

Adopted industrial-grade structural design, the movement accuracy of xTool D1 can reach unbelievably 0.01mm . With the ultrafine compressed laser spot from 0.08*0.08mm, always shows the best details in both engraving and cutting.

Industrial grade ALL STEEL wheel and shaft

Different from the plastic steel of other laser machines, the ALL-STEEL wheel and shaft enable the xTool D1 to work with an accuracy greater than 0.01mm. Also, it supports more than 100,000 scrolls and has a duration 3 times higher to that of the plastic wheel.

Tension wheel and synchronous belt

By tightening the synchronous belt with the tension wheel adjuster, the movement space is eliminated, machine vibration is reduced and motion stability is improved , so that the engraving remains precise even at high processing speeds.

* xTool is the first brand in its class to use closed belts, thus avoiding the problem of reinstalling after the belt has been loosened.

Fine vector graphics engraving	Repeated positioning accuracy of 0.02mm
Moderate synchronous belt tension is essential for movement accuracy. The tension wheel and synchronous belt enable the D1 to engrave fine vector graphics at high speed.	The robust structure design makes D1 more stable, and the repeated positioning accuracy is less than 0.02mm . It maintains perfect engraving effect even after long time use.

The better laser improves the cutting and engraving effect

It uses innovative dual laser technology to combine two laser beams into one spot. The compressed point has higher power, higher cutting capacity, faster speed and better effect with the same electric energy. The xTool D1 10W dual laser power is equivalent to that of a 15W single laser laser cutting machine.

Cutting wood and acrylic (one step)

Explore the beauty of acrylic

* Limited by the characteristics of the material itself, the semiconductor laser (blue laser) can only cut dark acrylic materials.

Directly engrave stainless steel metal

No Coating Needed - Faster Speed ​​- Darker Engraved Pattern

Ultrafine compression spots

It uses innovative compression technology to make the spot smaller and more powerful, from 0.15*0.15mm to 0.08*0.08mm .

Cut lines accurately and create fewer burn marks.	Engraving fine, clear lines down to 0.06mm.

Little details. Big difference.

	The risers Use additional risers (sold separately) to increase the height of the xTool D1 to make it easier to engrave taller objects (use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them look better.
Easy focus adjustment Just 3 steps to adjust the focus in 5 seconds. Lower the original focus lever, slide the laser cursor to bring the focus lever closer to the material surface, reset the focus lever.
	Large engraving area A large working area of ​​432*406 mm (17*16 inch), larger than A3 paper size, allows you to engrave multiple patterns at the same time. Easier to use and more efficient.
Multiple ways of data transfer You can transfer data via Wi-Fi, USB cable, a large-capacity TF card (offline use), and use D1 anytime, anywhere.

Rotary engraving

Customize a variety of cylindrical materials with the rotating attachment (sold separately). Try customizing patterns on a mug or baseball bat as a gift! (With 2 sets of risers for engraving cylindrical materials with a diameter of 105mm.)

Better software at your service

Get started quickly with our intuitive software: Laserbox Basic Equipped with specialized software, xTool D1 allows you to work smoothly on Windows/macOS/Android/iOS devices. Learn more about the software
	Compatible with mature engraving software: LightBurn The layout, editing and control software for common laser cutting systems. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc. LightBurn User Guide

Brilliant ideas from xTool fans

PARTS LIST