2022 marks the birth of ECOSMART, the new RPETG by Printologist, a revolutionary filament, which promises to become the reference for hobbyists, in fact its philosophy embraces all the main today's needs:

1. Ecological

Thanks to its RPETG-based granule up to 100% recycled and recyclable, cardboard reel and sealed in bamboo bioplastic, it has everything needed for a zero impact product!

2. Economical

In a future that opens up 3D printing to large-scale consumption, the prerogative is to make the raw material accessible to all, which is why ECOSMART is the cheapest material on the market.

3. Funny

We print for fun, that's why ECOSMART is printed as easily as a classic PETG, you will have models resistant to temperatures and shocks suitable for all uses.

It does not require an enclosed chamber, is non-toxic and low shrinkage.

Print settings

Press tips

1. For a perfect first layer, lower the speed, turn off the fan and increase the flow slightly.
2. This material has the maximum aesthetic yield at low extrusion (230°), the mechanical potential instead increases at high temperature (245°) and moderate printing speed, the fan will always remain off.
3. It is always advisable to bring the hot dish to 70 - 80° and use hairspray.

Recommendations

The Ecosmart is RPETG, as such it requires previous PETG printing experience. Although not difficult to print, a minimum know-how of 3D printing is required, therefore we advise beginners who are approaching printing a material other than pla for the first time to start with a small quantity to test. The colors may vary slightly from the photos, based on the type of recycled material.