Anycubic Colored Basic Rigid UV Resin

Parametric information:

• Main material: resin monomer and photo-initiator
• Exposure parameters: First layer exposure time 20-60s, normal exposure time 5-15s

Precautions:

• Method of conservation:

1. Keep away from light sources and at room temperature. (The sun contains a lot of UV light, it will solidify the photosensitive resin. After the test, the light is not affected until it is UV light).
2. It is recommended to store at 15 -35 ° of room temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or humidity can affect print quality. The sun contains a lot of UV light, it will solidify photosensitive resin.

• Use:

1. Shake well before use, forbidden to use resin in places where there is a lot of sunlight.
2. Wear gloves before use to avoid direct skin contact and keep the environment ventilated.
3. Involuntary contact, as soon as possible rinse the part of the body that has had contact with water. If you feel unwell, see a doctor promptly.
4. Printed models should be cleaned with high concentration alcohol for at least 30S (recommended concentration of 95% or more, the higher the better).
5. Do not pour the resin of the tank into the bottle of the unused resin, do not leave the resin in the resin tank for a long time without using it, to avoid alterations of the resin that could affect the printing effect (the resin not used for a long time tempo can be placed in airtight containers or sealed with protective film).
6. The resin has a shelf life of up to 18 months