Pla-based material loaded with bamboo fibers that gives extreme realism to the print, rough and porous to the touch as if it were engraved in wood.

The material is extremely easy to print like common pla, it is also easily sandable and post-workable with specific impregnating agents for wood.

• Print settings

  Nozzle temperature: 190 - 220 °

  Bed temperature: 0 - 60 °

  Fan percentage: 0% first layer - 100% remaining model

  Print speed: 30 / 40mms perimeter - 60 / 80mms fills

  Shrinkage: Low

  Flat adhesive: Lacquer

  Advice: The fan on improves the surface quality incredibly, the filling can be printed at high speed to reduce the times but the perimeters require a moderate trend to have the maximum definition.