DJI ROBOMASTER S1 EP CORE EDU EXPANSION SET

The RoboMaster EP Core takes learning to the next level.
Official SDK
Powerful features and compatibility skills
High performance mechanical accessories
Project-based courses
Stratified Didactic Model
Extended teaching guidance materials

The DJI RoboMaster EP Core is an educational robot that brings coding and artificial intelligence to any classroom. It also offers the official DJI Software Development Kit (SDK), expandable software and hardware, a customized curriculum, and the all-new RoboMaster Youth Tournament. Simply put, the RoboMaster EP is an unrivaled educational tool for students and educators.

Crafted from stainless steel and finished in a sleek, futuristic design, RoboMaster EP Core is fully equipped with cutting-edge technologies that provide significant support for classroom learning.

Unmatched tools for teaching
Official SDK
Powerful features and compatibility skills
High performance mechanical accessories

Educational resources
Project-based courses
Stratified Didactic Model
Extended teaching guidance materials

Infrared distance sensor

Detection range

0.1-10m

Field of View (FOV)

20th

Accuracy [1]

5%

Robotic arm

Shift range

Horizontal: 22cm, Vertical: 15cm

Number of axles

2

Grippers

Interval

About 10cm

Servant

Weight

About 70g

Body size

44.2×22.6×28.6mm

transmission report

512:1

Operating modes

Angle mode, Speed ​​mode

Sensor adapter

Port type

I, AD

Number of doors

2

Power connector module

Communication port

CAN bus

Power Connector Module

Outputs

USB Type A power port: 5V 2A Power port with footstrip: 5V 4ATX30 Power port: 12V 5A

Input

TX30 Power Port: 12V

Camera

Field of View (FOV)

120°

Maximum photo resolution

2560×1440

Maximum video resolution

FHD: 1080/30fps

HD: 720/30fps

Maximum video bitrate

16Mbps

Photo format

jpeg

Video format

MP4

sensor

CMOS 1/4″; effective pixels: 5MP

Operating temperature range

-10 to 40°C (14 to 104°F)

Shock detector

Detection requirements

For the shock detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6 mm, launch speed ≥ 20 m/s and the angle between the shock direction and the detector plane must not be less than 45°.

Maximum detection rate

15Hz

EP Core

Weight

Approximately 3.3kg

Dimensions

320×240×270mm (length×width×height)

Frame speed range

0-3.5m/s (forward)

0-2.5m/s (backward)

0-2.8m/s (lateral)

Maximum frame rotation speed

600°/s

M3508I brushless motor

Maximum rotation speed

1000rpm

M3509I brushless motor

Maximum torque

0.25N m

M3510I brushless motor

Maximum power output

19W

M3511I brushless motor

Operating temperature range

-10 to 40°C (14 to 104°F)

M3512I brushless motor

Drivers

FOC

M3513I brushless motor

Control method

Closed loop speed control

M3514I brushless motor

Protection

Overvoltage protection

Overtemperature protection

Soft start

Short circuit protection

Chip and sensor anomaly detection

Intelligent Controllers

latency [2]

Connection via Wi-Fi: 80-100ms

Connection via router: 100-120ms

(unobstructed, without interference)

Live View quality

720p/30fps

Maximum live view bit rate

6Mbps

Operating frequency [3]

2.4GHz, 5.1GHz, 5.8GHz

Operative mode

Connect via Wi-Fi, connect via router

Maximum transmission distance [4]

Connection via Wi-Fi:

FCC, 2.4GHz 140m, 5.8GHz 90m

CE, 2.4GHz 130m, 5.8GHz 70m

SRRC, 2.4GHz 130m, 5.8GHz 90m

MIC, 2.4GHz 130m

Connection via router:

FCC, 2.4GHz 190m, 5.8GHz 300m

CE, 2.4GHz 180m, 5.8GHz 70m

SRRC, 2.4GHz 180m, 5.8GHz 300m

MIC, 2.4GHz 180m

Transmit power (EIRP)

2.400-2.4835GHz

FCC: ≤30dBm

SRRC: ≤20dBm

MIC: ≤20dBm

5.170-5.25GHz

FCC: ≤30dBm

SRRC: ≤23dBm

MIC: ≤23dBm

5.725-5.850GHz

FCC: ≤30dBm

SRRC: ≤30dBm

Transmission standards

IEEE802.11a/b/g/n

Smart battery

Capacity

2400mAh

Nominal charge voltage

10.8V

Maximum charge voltage

12.6V

Battery Type

3S LiPo

Power

25.92Wh

Weight

169 g

Operating temperature range

-10 to 40°C (14 to 104°F)

Charging temperature range

5 to 40°C (41 to 104°F)

Maximum charging power

29W

Battery life in use

35 minutes (at a constant speed of 2 m/s on a flat surface)

Stand-by battery life

About 100 minutes

Charger

Input

100-240V, 50-60Hz, 1A

Outputs

Port: 12.6V=0.8A or 12.6V=2.2A

Voltage

12.6V

Nominal tension

28W

App

App

RoboMaster

iOS

iOS 10.0.2 or later

android

Android 5.0 or later

Routers

Recommended routers

TP-Link Archer C7; NETGEAR X6S (International)

Recommended external power solution for the router

Power bank for laptop (matching the input power of the router)

microSD card

SD cards supported

It supports microSD cards with a maximum capacity of 64GB