It allows the connection of M300 RTK with Manifold 2 and offers adapter interfaces for on-board IT platforms.
Compatible with M300 RTK and Manifold 2.
Converts interfaces on the M300 RTK OSDK to standard interfaces such as USB Type-A, UART serial port, and XT30 power output, to enable connection with on-board computing platforms.
It can be used with the single upward gimbal to meet the needs of multiple scenarios.
When mounted on the M300 RTK, the module can be stowed in the safety carrying case while attached to the drone, ensuring easier storage.
This module converts the M300 RTK OSDK interfaces into standard interfaces such as USB Type-A, UART serial ports and XT30 power sockets, to allow connection with on-board computing platforms. The module is not designed with dust or water proof functionality.
Please assemble according to the instructions in the user manual before use. For more information, visit https://developer.dji.com.
Bracket A (upper) x 2
Bracket B (left) x 1
Bracket C (right) x 1
Bracket D (reinforcing rib) x 3
Bracket connection block x 4
OSDK adapter plate module x 1
USB cable (with two type-A ports) x 1
XT30 power cable x 1
Wire clip x 3
Foot pad x 3
Hand screw x 5
Screw A (M1.6) x 15
Screw B (M2.0) x 5
Screw C (M3.0) x 5
Screw D (M1.6 step) x 3
Screwdriver kit x 1
As-assembled size: 200 x 120 x 40 mm
M300 RTK matrix